Is a leaking boiler dangerous? +
A leaking boiler should always be taken seriously. While a small drip from a pressure relief valve may indicate a minor issue, water leaking from the boiler casing can damage internal electrics and create a safety hazard. Never attempt to repair a boiler leak yourself.
What should I do if I smell gas near my boiler? +
If you smell gas, do not touch any electrical switches, do not light any flames, and open all windows and doors immediately. Turn off the gas supply at the meter using the emergency control valve — turn the handle so it sits across the pipe. Leave the property and call the National Gas Emergency Service on 0800 111 999 from outside. Do not re-enter until given the all-clear.
My boiler keeps losing pressure — is this an emergency? +
A boiler that loses pressure gradually over weeks usually has a small leak somewhere in the system — often a radiator valve or a pipe joint. This is not an immediate emergency but needs investigating. If the pressure drops rapidly or the boiler is cutting out repeatedly, call an engineer promptly. You can repressurise the boiler using the filling loop as a temporary fix, but this does not solve the underlying problem.
My boiler has broken down in winter — what should I do? +
Check the obvious things first: is the thermostat set correctly, is the timer on, and has the boiler pressure dropped below 1 bar? If the pressure is low, you can repressurise it yourself using the filling loop — your boiler manual will show you how.
Which boiler brands do your engineers in Ashford work on? +
Our boiler engineers in Ashford work on all major brands including Worcester Bosch, Vaillant, Baxi, Ideal, Viessmann, Glow-worm, and Potterton. Many are manufacturer-approved installers, meaning they can offer extended warranties on new installations. If you have a less common boiler brand, let us know and we will match you with an engineer who has experience with your specific model.
Combi, system or conventional boiler — which do I need? +
A combi boiler heats water on demand and is ideal for smaller homes with one bathroom — no tank or cylinder needed. A system boiler uses a hot water cylinder and suits homes with two or more bathrooms where demand is higher. Conventional (regular) boilers have both a cylinder and header tanks and are found in older properties. Your engineer will recommend the right type based on your home's size and hot water demand.