My boiler has broken down in winter — what should I do? +
Check the obvious things first: is the thermostat set correctly, is the timer on, and has the boiler pressure dropped below 1 bar? If the pressure is low, you can repressurise it yourself using the filling loop — your boiler manual will show you how.
Is a leaking boiler dangerous? +
A leaking boiler should always be taken seriously. While a small drip from a pressure relief valve may indicate a minor issue, water leaking from the boiler casing can damage internal electrics and create a safety hazard. Never attempt to repair a boiler leak yourself.
What are the signs of carbon monoxide from a boiler? +
Warning signs include a yellow or orange boiler flame instead of blue, dark staining around the boiler, increased condensation on windows, and a pilot light that frequently goes out. Symptoms of carbon monoxide exposure include headaches, dizziness, nausea and confusion. If you suspect a carbon monoxide leak, open windows, leave the property immediately and call the Gas Emergency Service on 0800 111 999. Fit a CO alarm near your boiler — they cost under £20 and save lives.
What should I do if I smell gas near my boiler? +
If you smell gas, do not touch any electrical switches, do not light any flames, and open all windows and doors immediately. Turn off the gas supply at the meter using the emergency control valve — turn the handle so it sits across the pipe. Leave the property and call the National Gas Emergency Service on 0800 111 999 from outside. Do not re-enter until given the all-clear.
How long does a boiler service take? +
A standard annual boiler service takes 30 to 45 minutes. The engineer will inspect the boiler internals, check gas pressure and flow rate, carry out a flue gas analysis, and test all safety devices. You will receive a service record which you should keep as proof for your warranty. The engineer should also flag any parts showing early signs of wear.
How long does a boiler installation take? +
A straightforward like-for-like combi boiler replacement typically takes one day — around 6 to 8 hours. If the boiler is being relocated, the flue route changed, or you are converting from a conventional system, the job can take 2 to 3 days. Your engineer should give you a clear timeline before starting and ensure you have hot water by the end of the final day.